Flame Projector

Buying the right flame projector is easy. We’ll tell you which flame projector suits you best.

Flame Projector “Flame Colossus V1”

262.22 / inkl. 16% MwSt.
Equipped with 1 aerosol cartridge, the Flame Colossus V1 is ideal for a fast effective event appearance. Finally, the projector spits between 2 to 4 meters high flames – up to 200 times in a row! Thanks to the control function via DMX transmission protocol, the projector is linked in short time with other flame projectors.

 

Delivery

1 x Collosus V1 flame projector
1 x Powercon power plug
1 x 2 meter DMX cable
1 x user manual

Description

Are you looking for a special effect for your event?
Then Alcatech Eventtechnik has exactly the right equipment for you.

The Alcatech Colossus V1 Flame Projector is a fire projector designed specifically for flame shows. The flame projector requires as fuel 1 aerosol cartridge with a special gas mixture. The aerosol cartridge, so also flame spray can be whole simple in the device use. The Collosus flame projector can then easily be dispensed through the valves, the desired amount of gas and ignited. With this method, you can create standing flames or fireballs.
The housing of the Alcatech Collosus V1 flame projector is made of refractory metal and has a good stability. The flame projector does not need to be fixed to the ground. For controlling the Alcatech Collosus V1 flame projector you can use the DMX 512 transmission protocol. For the connection to a DMX controller has the fire projector 3 pin XLR, as well as 5 pin XLR inputs and outputs. The fire project is connected to the mains via a Powercon power plug and can then be operated directly.
Thus, the security of the Collosus V1 is secured for you, has a flame projector on a tilt protection and a safety channel.
Since the Alcatech Collosus is operated with Aersosolkartuschen, this is not subject to the guidelines of pyrotechnics. You do not need a pyrotechnics certificate for the operation.
Please always observe the safety instructions in the operating instructions and only allow the device to be operated by qualified personnel or trained persons.

Technical specifications

Voltage: AC 230V 50Hz
Power consumption: 80W
Output: 90 °
Capacity: 1 x 400 ml
Flame height: up to 5M
Safety: anti-tilt protection, safety channel
Mode: DMX / Manual
Signal: DMX 512
DMX channels: 2
DMX connection: 3 pin / 5 pin
Safety distance: 3m / 6m
Weight: 3 kg
Dimensions: 185x185x295 mm

You should buy this flame projector,

if you are looking for effective event technology with upgrade functions.

Z

Safety first

Fireproof housing, DMX safety channel and anti-tipper ensure maximum safety.

Flame Projector “Flame Colossus V2”

369.45 / inkl. 16% MwSt.
Equipped with 2 aerosol cartridges, the Flame Colossus V2 is ideal for large and elaborate stage installations. Up to 5 meters high flames spits the projector at the touch of a button. The dual valve control is controlled by DMX transmission protocol: In short time you can connect the Collossus V2 with additional flame projectors.

 

Delivery

1 x Collosus V2 flame projector
1 x Powercon power plug
1 x 2 meter DMX cable
1 x user manual

Description

With the Fire Projector by Alcatech, you can generate 2 standing flames or fireballs up to 5m high via DMX512 Signal 2.
The device is operated with aerosol cans, which can be inserted into the device with a single movement.
Compared to previous butane gas burners, only a small amount of gas is needed on the stage.
But that does not detract from the performance, with an aerosol can far more than 100 flashes and fireballs can be generated.
The first DMX channel is to ignite and the second is occupied for a flame time of 0.3 – 3 seconds.
With several flame projectors one can produce gigantic flame shows, which inspire the audience enormously.
This flame projector has a sturdy housing, which also ensures good stability.
So the flame projector does not need to be fixed to the ground anymore.
The device with an outstanding price-performance ratio is ideal for rock bands, DJs, disco teams, discos, event technicians in the stage technology
and everything related to revolutionary stage shows.

The high quality valves work only one way safe and reliable.
In compliance with the safety instructions, the use of our flame machine is safe.
The application is not pyrotechnic, as only aerosol cans are used for operation,
Please observe our safety instructions and clarify at public events the use of the device with the responsible fire department and your office.

Technical specifications

Voltage: AC 230V 50Hz
Power consumption: 120W
Flame height: up to 4M
Capacity: 2 x 400ml
Mode: DMX / Manual
Signal: DMX 512
Safety: Safety channel, anti-tilt device
DMX connection: 3 Pin / 5 Pin
Safety distance: 3m / 6m
Weight: 6kg
Dimensions: 225x225x330 mm

You should buy this flame projector,

if you are looking for stage equipment for regular, breathtaking events.

Z

Safety first

Fireproof housing, DMX safety channel and anti-tipper ensure maximum safety.

Flame Projector “Flame Colossus V3”

486.42 / inkl. 16% MwSt.
Equipped with 3 aerosol cartridges, the Collossus V3 flame projector is ideal for professional flame shows. In three different directions the projector spits flames up to 4 meters high. Perfect for creating individual effects over a large area. Thanks to the control via DMX protocol, a high degree of security and, at the same time, potential for superlative shows is required: the Flame Collossus V3 can be linked to other projectors with just a few clicks.

 

Delivery

1 x Collosus V3 flame projector
1 x Powercon power plug
1 x 2 meter DMX cable
1 x user manual

Description

With the Collosus V3 Fire Projector by Alcatech, you can generate signal via DMX512, 3 standing flames or fireballs up to 4m in height.
The flames are fired at the Collosus V3 via 3 separate exits, in 3 different directions (L: 60°, M: 90°, R: 60°).
The device is operated with aerosol cans, which can be inserted into the device with a single movement.
Compared to previous butane gas burners, only a small amount of gas is needed on the stage.
But that does not detract from the performance, with an aerosol can far more than 100 flashes and fireballs can be generated.
Over 6 DMX channels each valve and the associated detonator are controlled.
With several Collosus V3 flame projectors you can create gigantic flameshows that delight the audience enormously.
This flame projector has a robust housing, which also ensures good stability.
So the flame projector does not need to be fixed to the ground anymore.
The device with an outstanding price-performance ratio is ideal for rock bands, DJs, disco teams, discos, event technicians in the stage technology
and everything related to revolutionary stage shows.

The high quality valves work only one way safe and reliable.
In compliance with the safety instructions, the use of our flame projector is harmless.
The application is not pyrotechnic, as only aerosol cans are used for operation,
Please observe our safety instructions and clarify at public events the use of the device with the responsible fire department and your office.

Technical specifications

Voltage: AC 230V 50Hz
Power consumption: 180W
Output: 3 Cardinal directions: (L: 60°, M: 90°, R: 60°)
Flame height: up to 4M
Capacity: 3 x 400ml
Mode: DMX
Signal: DMX 512
DMX channels: 6
Flame times: 0.3 – 3 sec.
DMX connection: 3 Pin / 5 Pin
Safety distance: 3m / 6m
Weight: 6kg
Dimensions: 285x220x330 mm

You should buy this flame projector,

if you are looking for upper class event technology for unforgettable shows.

Z

Safety first

Fireproof housing, DMX safety channel and anti-tipper ensure maximum safety.

Spark Master Fountain Projector Effect Machine

876.33 / inkl. 16% MwSt.
With the Spark of Alcatech you can create fountains with a duration of up to 10 minutes. The device can be operated either via DMX 512 or the supplied remote control. The fountain height is 1-5 meters.
The use of the Spark is safe in compliance with the safety instructions.
The device and its generated effect are not covered by pyrotechnics.
There are no flames or smoke as with conventional pyrotechnics.
The required granules are also available from us.

Delivery

1x Spark device
1x Remote control (without batteries)
1x Powercon power plug

Technical data

Power supply: 110v / 220v AC, 50/60 hz
Power consumption: 700watt
Fountain: Adjustable 1-3 m indoor, 2-5 m outdoor
Fountain output: vertical
Working temperature: -10 ℃ to 50 ℃
Warm-up time: less than 8 minutes
Case: Anti-Flaming ABS
Control:: DMX 512, remote control
Powercon input and output
DMX input and output
Capacity: 200G
Effect duration: up to 10 min
Dimensions: 248 * 244 * 322mm
Weight: 10.1 kg

Du solltest diesen Flamenprojektor kaufen,

wenn du extrem große Flammen erzeugen möchtest.

Z

Safety first

Feuerfestes Gehäuse, DMX-Sicherheitskanal und Kippsicherung gewähren maximale Sicherheit.

Tasting complacent?

Our flame projectors in action

A fireball is worth a thousand words. See for yourself what Alcatech flame projectors bring to the stage.

Attention only for a short time! FREE
to every flame projector buy.

Flame Spray for free

For every buyer of a flame projector there’s an aerosol cartridge as a thank you from Alcatech.

10% discount - guaranteed

We grant our customers a permanent 10% discount on all aerosol cartridges.

Features

Buy Flame Projector from Alcatech? Why? How so? Therefore:

Support

We attach great importance to the satisfaction of our customers. This includes expert advice and far-reaching help with commissioning.

U

Development

We work on the optimal implementation of our systems. New features and product compatibility extend our support.

Z

High quality

Our flame projectors are made of refractory metal. In addition, the connections are milled out clean and equipped with high-quality contacts.

Pyrotechnics certificate superfluous

The operation of our flame projectors does NOT require a pyrotechnics license. So you are allowed to plan your show without authority stress and office delusion.

~

Safety

Each flame projector has a tilt protection. In addition, multi-channel control via the DMX protocol is crucial: the risk of accidents falls to a minimum.

Loyalty Bonus

If you decide to buy a flame projector, we guarantee an unlimited 10% discount on aerosol cartridges.

What customers say

We see ourselves as a company with tradition. A satisfied, loyal customer base is an integral part of our corporate philosophy.

“Unbelievable what these little miracle machines bring to the stage. Was my first assignment. A complete success. Both thumbs up “
Matthias Jost, Osnabrück

“At first, we had difficulty in synchronizing with the flame projectors. However, the Alcatech team competently guided us through the installation. “
Emil Bauer, Haagen

“With the flame projector Collossus V1 we rocked the village party for little money. We are thinking about buying “
Veronika Burg, Lette

Important questions

Flame projectors mark the cream of the event technology. The projectors of Alcatech shoot either standing flames or fireballs. Aerosol is always used as propellant.

The big advantage of aerosol cartridges: The operation is much easier and safer than alternative gas mixtures. For example, the cans can be inserted directly into the projectors. And: For the operation no pyrotechnician certificate is needed!

We offer flame projectors in different versions. This ensures that a suitable model is available for every taste. How many flames should be generated? How long should the projector work? At Alcatech, you can buy a suitable flame projector for every scenario.

Free shipping throughout Germany

No pyrotechnics certificate required

Safety channel and anti-tilt device minimize accident risk

Short delivery time

Free deployment of DMX control software