fbpx

Co2 FX Jet

349,00

Includes 19% VAT
Delivery Time: sofort verfügbar
Additional costs (e.g. for customs or taxes) may occur when shipping to non-EU countries.

The Alcatech Co2 FX Jet is a Co2-based effects unit. Using a Co2 bottle, the FX Jet generates a Co2 smoke column of up to 8 meters.

2 in stock

SKU: ALC10034-1 Category: Tags: , , , , ,

Description

The Alcatech Co2 FX Jet is a Co2-based effects unit. Using a Co2 bottle, the FX Jet generates a Co2 smoke column of up to 8 meters. The device has been specially designed for shows on stages, in clubs and similar events and generates a refreshing nebula columns which dissipate directly after leaving. The required Co2 gas can be taken from a Co2 bottle with riser. You can control the Co2 FX Jet via the DMX512 protocol and a standard DMX controller. For this you have the possibility to transmit the signal via 3 pin XLR connector. The delivery includes a 6 meter high pressure hose which connects the device with a Co2 bottle. For power, the Co2 FX Jet connects to power via the included Powercon power cord and can power additional devices with a Powercon bridge cable. The DMX address can be set via the digital DMX control panel on the device.

Technical specifications:
Voltage: AC 110-220V 50 / 60Hz
Output height: up to 8M
maximum pressure: 96.5 bar
Output: 60 ° – 90 ° Mode: DMX / Manual Signal: DMX 512
DMX channels: 1
Effect times: up to 10 sec. DMX connection: 3 pin XLR input and output
Power connection: Powercon input and output
Safety distance: 2m radius / 7m height
Weight: 3.5 kg Dimensions: 275x2125x230 mm
Power consumption: 30W

Consumption: Liquid Co2 (bottle with standpipe)
27 liter bottle: about 40 seconds of continuous operation
40 liter bottle: about 70 seconds of continuous operation

Delivery:
Co2 Fx Jet 6 meter high pressure hose
2 meters DMX cable
Powercon power cord
operation manual

Additional information

Weight3.5 kg
Dimensions27.5 × 212.5 × 23 cm

Reviews

There are no reviews yet.

Be the first to review “Co2 FX Jet”

Your email address will not be published. Required fields are marked *